.NET多語系程式(四) - 已開啟表單的語系切換
記得在.NET多語系程式(一)中，有提到若要切換已開啟的表單時，我們可以參考Designer.vb檔，透過ComponentResourceManager配合遞迴來作切換的動作。這邊讓我們來看一下實作方式：
''' <summary>
''' Changes the UI language.
''' </summary>
''' <param name="form">The form.</param>
''' <remarks></remarks>
Public Shared Sub ChangeUILanguage(ByVal form As Form)
'-------------------------------
'Author: Larry Nung Date:2008/12/11
'Memo: 參數檢查
'-------------------------------
If form Is Nothing Then
Throw New ArgumentNullException("form")
End If
'-------------------------------
'Author: Larry Nung Date:2008/12/11
'Memo: 區域變數宣告
'-------------------------------
Dim rm As ComponentResourceManager = Nothing
'-------------------------------
'Author: Larry Nung Date:2008/2/11
'Memo: 切換介面顯示的語言
'-------------------------------
Try
rm = New ComponentResourceManager(form.GetType)
For Each ctl As Control In form.Controls
ApplyControlResource(ctl, rm)
Next
Finally
rm = Nothing
End Try
End Sub
''' <summary>
''' 套用資源設定到控制項(含選單與工具列)
''' </summary>
''' <param name="control">The control.</param>
''' <param name="rm">The ComponentResourceManager.</param>
''' <remarks></remarks>
Private Shared Sub ApplyControlResource(ByRef control As Control, ByRef rm As ComponentResourceManager)
'-------------------------------
'Author: Larry Nung Date:2008/12/11
'Memo: 參數檢查
'-------------------------------
If control Is Nothing Then
Throw New ArgumentNullException("control")
End If
If rm Is Nothing Then
Throw New ArgumentNullException("rm")
End If
'-------------------------------
'Author: Larry Nung Date:2008/12/11
'Memo:
'-------------------------------
rm.ApplyResources(control, control.Name)
If TypeOf control Is MenuStrip Then
Dim menuStrip As MenuStrip = CType(control, MenuStrip)
For Each menuItem As ToolStripItem In menuStrip.Items
ApplyToolStripResource(menuItem, rm)
Next
ElseIf TypeOf control Is ToolStrip Then
Dim toolStrip As ToolStrip = CType(control, ToolStrip)
For Each toolStriptItem As ToolStripItem In toolStrip.Items
ApplyToolStripResource(toolStriptItem, rm)
Next
ElseIf control.Controls.Count > 0 Then
For Each ctrl As Control In control.Controls
ApplyControlResource(ctrl, rm)
Next
End If
End Sub
''' <summary>
''' 套用資源設定到選單或工具列
''' </summary>
''' <param name="toolStripItem">The tool strip item.</param>
''' <param name="rm">The ComponentResourceManager.</param>
''' <remarks></remarks>
Private Shared Sub ApplyToolStripResource(ByRef toolStripItem As ToolStripItem, ByRef rm As ComponentResourceManager)
'-------------------------------
'Author: Larry Nung Date:2008/12/11
'Memo: 參數檢查
'-------------------------------
If toolStripItem Is Nothing Then
Throw New ArgumentNullException("toolStripItem")
End If
If rm Is Nothing Then
Throw New ArgumentNullException("rm")
End If
'-------------------------------
'Author: Larry Nung Date:2008/12/11
'Memo:
'-------------------------------
rm.ApplyResources(toolStripItem, toolStripItem.Name)
If TypeOf toolStripItem Is ToolStripMenuItem Then
Dim toolStripMenuItem As ToolStripMenuItem = CType(toolStripItem, ToolStripMenuItem)
For Each Item As ToolStripItem In toolStripMenuItem.DropDownItems
ApplyToolStripResource(Item, rm)
Next
End If
End Sub
使用時，我們先用Threading.Thread.CurrentThread.CurrentUICulture切換當前語系，再呼叫ChangeUILanguage並把要切換語系的表單參考傳入即可，像是：
System.Threading.Thread.CurrentThread.CurrentUICulture = New Globalization.CultureInfo("en")
ChangeUILanguage(Me)
執行後已開啟的視窗介面就會被切換語系了
另外還有一種切換方式是在小歐大那邊貼的連結看到的，程式較為簡單，主要是透過呼叫InitializeComponent來達成，使用上會像下面這樣：
System.Threading.Thread.CurrentThread.CurrentUICulture = New Globalization.CultureInfo("en")
For idx As Integer = Controls.Count - 1 To 0 Step -1
Controls(idx).Dispose()
Next
InitializeComponent()
雖然簡單很多，但使用上需特別注意記憶體的使用與效率。因為InitializeComponent副程式內部會建立過多物件、設定過多不需重設的屬性，且使用中的物件可能會無法被GC回收。另外還會造成畫面閃爍與介面變回初始狀態等問題。
這邊我也做了點小實驗，讓我們看看ComponentResourceManager配合遞迴來切換語系的測試程式：
System.Threading.Thread.CurrentThread.CurrentUICulture = New Globalization.CultureInfo("en")
Dim sw As Stopwatch = Stopwatch.StartNew
For i As Integer = 1 To 10000
ChangeUILanguage(Me)
Next
MsgBox(sw.ElapsedMilliseconds.ToString & "ms")
測試後所花的時間為19943ms
記憶體佔用量為19,944k
InitializeComponent切換語系的測試程式如下：
System.Threading.Thread.CurrentThread.CurrentUICulture = New Globalization.CultureInfo("en")
Dim sw As Stopwatch = Stopwatch.StartNew
For i As Integer = 1 To 10000
For idx As Integer = Controls.Count - 1 To 0 Step -1
Controls(idx).Dispose()
Next
InitializeComponent()
Next
MsgBox(sw.ElapsedMilliseconds.ToString & "ms")
測試後所花的時間為35416ms
記憶體佔用量為20,100k
記憶體佔用量差異不大，有可能會有誤差值。請自行測試判斷。
